CNC Busbar Cutting Machine
Delivery term:The date of payment from buyers deliver within days- Price:
Negotiable
- minimum:
- Total supply:
- Delivery term:
The date of payment from buyers deliver within days
- seat:
Shandong
- Validity to:
Long-term effective
- Last update:
2021-06-24 19:50
- Browse the number:
494
- Jinan Deshang CNC Equipment Co., Ltd By certification [File Integrity]
-
Contact:
jndeshang(Mr.)
- Email:
- Telephone:
- Phone:
-
Area:
Shandong
-
Address:
Room 1906-1, Unit 1, Building 7, Dinghao Plaza, 44 Gongye South Road, Jinan Area, China (Shandong) Pilot Free Trade Zone.
- Website: http://www.cncbusbar.com/ http://jndeshang.szgpjs.com/
Product details
DS-303SK-B Copper busbar cutting machine
This series CNC busbar processing machine has three units: punching, cutting and bending. It is easily to adjust each unit to shorten the processing time and improve the production efficiency. The bending unit uses the imported PLC control system, which have stable system and high precision. It is used to processes copper and aluminum busbars in different specification. By relative operation unit if can easily and quickly do all kinds of processing to copper and aluminum busbar, such as shearing, punching (circular hole and oblong hole), flat/honrizental bending, vertical bending and knurling. Change different mold to do special processing to copper bar, such as flat press, embossing, cable connector process, and can do cutting, flat crushing, pushing, and bending.
Copper busbar cutting machine
Leveling the foot pad
Automatic adjustment according to ground requirements to make the machine more stable
Fuel tank oil seal
To prevent debris from falling into the fuel tank and causing the valve to open
Pressure gauge
The pressure can be observed at any time, and can be pressurized or depressurized at any time according to the thickness of the copper bar
Stable voltage
Stable high and low potential free charge directional movement. Common voltages 220V, 350V, 400V, 410V can be customized if other voltages are required.
Model No. |
DS-303SK-B |
|
Colour |
Blue |
|
Punch |
Max. Punch Force |
300kn |
Punch Diameter |
∅4.3—∅30mm |
|
Max. Thickness |
15mm |
|
Max. Width |
160mm |
|
Shear Cut |
Max. Cut Force |
500kn |
Max. Cut Thickness |
15mm |
|
Max. Cut Width |
160mm |
|
Horizontal Bend |
Max. Punch Force |
300kn |
Max. Thickness |
15mm |
|
Max. Width |
160mm |
|
Vertical Bend |
Max. Width |
10 x 100 |
Max. Angle (Degree) |
90° |
|
Dimension |
MM |
1890*1350*1400mm |
Moteur Power |
KW |
3*4 |
Weight |
KG |
1300 |
CNC Precision |
Bend Precision |
±1° |
Repeat Bend Precision |
±0.2° |
|
Accessories |
Quantity |
|
Punching die |
8 sets |
|
Horizontal bending die |
2 sets |
|
Cutting knife |
1 set |
|
Equipment specification |
1 set |
|
Foot switch |
3 sets |
|
Embossing die |
1 set |
|
Duplicate relay |
1 set |
|
Standby proximity switch |
1 set |
|
Maintenance tool |
1 set |
|
Leveling Foundation |
4 set |
|
Vertical bending die |
1 set |
|
Punching location needle/lamp |
1 set |
1. Motor: Juli Weite (the export volume ranks first in the country), 100% pure copper motor, this motor has the advantages of good stability, low noise and low failure rate.
2. Oil pump: Taiwan Xinhong Motor (the price is about 700 higher than the domestic motor). Our oil pumps are gear oil pumps, and many other manufacturers are plunger pumps.
3. The solenoid valve overflow valve is made of Taiwan, with good sealing and long life.
4. Hydraulic tubing seals: three-layer steel wire high-pressure tubing.
5. Fuel tank: The steel plate welded with internal phosphating treatment has a good anti-rust effect.
6. Mould: The punching and shearing mould is made of Luo 12 molybdenum and vanadium material to ensure the service life of the mould. All the bending stations use 45# forging materials, quenching heat treatment, flange treatment, perfect processing technology and reliable materials, so you will have no worries in the future use process.
7. Punching positioning: X, Y axis reverse positioning, high efficiency, high accuracy, suitable for mass production.
8. The shape of the equipment is sprayed with plastic, not ordinary spray paint.
9. The whole machine adopts Panasonic PLC control, which is more stable and reliable than traditional relay control. The bending angle is directly input, the operation is simple, the angle is accurate and includes the memory function, and the processing method is arbitrarily called.
http://www.cncbusbar.com/
-
Breathable and Waterproof Car Cover
price: Negotiable
-
AISI 420 Stainless Steel Castings
price: Negotiable
-
EVA Slice Slipper
price: Negotiable
-
Built in Single Induction Hob
price: Negotiable
-
EMI Fingerstock
price: Negotiable
-
miniature DC gear motor
price: Negotiable